East End Welding

East End Welding LP

A Subsidiary of Connell Limited Partnership

     
Automated Machining Equipment
Johnford Bridge Mill
SDMC 9000
  • XYZ Travels – 354 x 190 x 63-in.
• Programmable Right-Angle Head 5-degree index
• Table Size – 354 x 133-in.
• 60-Tool Holder
• FANUC Series 18i – MB controls
Johnford Horizontal Boring Mill
BMC – 110
  • XYZ Travels – 79 x 71 x 63-in.
• 22 inches of spindle travel “W”
• B Axis Rotary Table
• Table Load Capacity up to 15,400 lbs.
• 60-Tool Holder
• FANUC Series 18i – MB controls
Haas Vertical Machining Center
VF 11
• XYZ Travels – 120 x 40 x 30-in.
• 30-Tool Holder
• HAAS Automation controls
Haas Vertical Machining Center
VF-5
• XYZ Travels – 50 x 26 x 16-in.
• 20-Tool Holder
• HAAS Automation controls
 
 
Haas Vertical Machining Center
VS 3
• XYZ Travels – 150 x 50 x 50-in.
• 30-Tool Holder
• HAAS Automation controls
Haas Vertical Machining Center
TM 2
  • XYZ Travels – 40 x 16 x 16-in.
• 20-Tool Holder
• Haas Automation controls
Acra Vertical Machining Center
• XYZ Travels 20 x 40 x 24-in.
• Anilam 1100 M controls
AUTOMATED LATHES:
Johnford CNC Lathe
ST-70C
• 30-in. diameter x 60-in. bed
• FANUC Series 18-T controls
Topper CNC Lathe
TNL 130 AL
• 24-in. diameter x 48-in. bed
• FANUC Series 0-T controls
 
     
 
Manual Machining Equipment
     
MANUAL MILLING
MANUAL LATHES
H.E.S.
• 24-in. turning capacity x 168-in. center-to-center
H.E.S.
• 20-in. turning capacity x 120-in. center-to-center
Takisawa
• 20-in. turning capacity x 60-in. center-to-center
Giddings & Lewis
Horizontal Boring Mill
• 4-in. spindle, 4 ft. x 11-ft. table
• XYZ travels 108 x 70 x 32-in.
• Spindle travel 29-in.
• 3-Axis digital readouts
Giddings & Lewis
Horizontal Boring Mill
  • 4-in. spindle, 5-ft. x 10-ft. table
• XYZ travels 120 x 48 x 30-in.
• Spindle travel 29-in.
• 3-Axis digital readouts
Bridgeport [Qty: 2]
• 9 x 42-in. table, 2-in. cross-travel
• Digital readout systems
   
     
       
 
 
INSPECTION CENTER:
Trained staff of 5 inspectors
ASME CODE STAMPS: S, U, PP, R
AWS-Certified Welding Inspection
Granite Surface Plates
6 x 36 x 48-in. table
9 x 48 x 120-in. table
Standards, gauge blocks, bore gauges, micrometers, and
all related equipment traceable to Bureau of Standards